Describe:The product indicators meet the drinking water grade standard of gb15892-2009. It has the characteristics of fine powder, uniform particle, easy dissolution in water, good flocculation effect, high efficiency and stability of purification, low dosage and low cost.
Product properties: light yellow powder
Product features: the product indicators meet the drinking water grade standard of gb15892-2020. It has the characteristics of fine powder, uniform particle, easy dissolution in water, good flocculation effect, high efficiency and stability of purification, low dosage and low cost.
Application: widely used in drinking water, urban water supply and industrial water purification.
usage method:
Solid products need to be dissolved and diluted before being put into use. Users can determine the best dosage through testing and dispensing reagent concentration according to different water quality.
① Solid products are 2-20%.
② The dosage of solid products is 1-15 g / T,
The specific dosage shall be subject to flocculation test and experiment.
Packaging and storage:
The solid is packed in 25kg bags, with inner plastic film and outer plastic woven bag. The product shall be stored indoors in a dry, ventilated and cool place, and shall not be affected by moisture. It is strictly prohibited to store it with flammable, corrosive and toxic substances.
Indicator name | Index | |
---|---|---|
national standard | Company standard | |
Mass fraction of alumina (AI2O3) /% ≥ | 29 | 30 |
Basicity /% | 40-90 | 80-85 |
Density (20 ℃) / (g / cm) ³) ≥ | 1.12 | -- |
Mass fraction of insoluble matter /% ≤ | 0.6 | 0.1 |
PH value (10g / L aqueous solution) | 3.5-5.0 | 4.0-4.3 |
Mass fraction of arsenic (as) /% ≤ | 0.0002 | 0.0001 |
Mass fraction of lead (PB) /% ≤ | 0.001 | 0.001 |
Mass fraction of cadmium (CD) /% ≤ | 0.0002 | 0.0001 |
Mass fraction of mercury (Hg) /% ≤ | 0.0001 | 0.0001 |
Mass fraction of hexavalent chromium (Cr6 +) /% ≤ | 0.0005 | 0.0002 |
Note: the indexes of as, Pb, CD, Hg and Cr6 + insoluble substances listed in the liquid products in the table are calculated as 10% of AI2O3. When the content of AI2O3 is ≤ 10%, the impurity indexes shall be calculated as 10% of i2o3 products. |